Power Cable Warning (Japanese) - Juniper ACX6160 Quick Start Manual

Universal metro router

Table of Contents

If the rack or cabinet has stabilizing devices, install them in the rack before mounting or servicing the ACX6160 in the

rack or cabinet.

Before installing or after removing an electrical component, always place it component-side up on a flat antistatic mat

or in an electrostatic bag.

Do not work on the ACX6160 or connect or disconnect cables during electrical storms.

Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches.

Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the

terminals.

Wire the DC power distribution unit by using the appropriate lugs. When connecting power, the proper wiring sequence

is ground to ground, +RTN to +RTN, and then –48 V to –48 V. When disconnecting power, the proper wiring sequence

is –48 V to –48 V, +RTN to +RTN, and then ground to ground. Always connect the ground wire first and disconnect it

last.

Power Cable Warning (Japanese)

The attached power cable is only for this product. Do not use this cable for another product. Contacting Juniper Networks

For technical support, see https://www.juniper.net/support/requesting-support.html.

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the

United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the

property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper

Table of Contents