Inspection, Maintenance, And Cleaning - CEN-TECH 92801 Operating Instructions Manual

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING!
remove the Batteries from the tool before performing any inspection, mainte-
nance, or cleaning.
2. Before each use: Inspect the general condition of the Laser Level. Check for
misalignment or binding of moving parts, cracked or broken parts, leaking Batter-
ies, and any other condition that may affect its safe operation. If abnormal noise
or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. Daily: With a clean cloth, remove all dirt, grease, and oil from the Laser Level. Do
not immerse the Laser Level in any liquids.
4. WARNING! All maintenance, service, or repairs not listed in this manual
are only to be attempted by a qualified service technician.
NOTE: NO REPLACEMENT PARTS ARE AVAILABLE FOR THIS PRODUCT.
SKU 92801 For technical questions, please call 1-800-444-3353.
Always turn the Power Switch (11) to its "OFF" position, and
Page 9