Table of Contents
Advertisement
ROTARY LASER LEVEL KIT
OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
Copyright
2005 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Model 92801
TO PREVENT SERIOUS INJURY,
®
. All rights reserved. No portion of this
®
Advertisement
Table of Contents
Related Manuals for CEN-TECH 92801
Summary of Contents for CEN-TECH 92801
- Page 1 ROTARY LASER LEVEL KIT Model 92801 OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. © ® Copyright 2005 by Harbor Freight Tools .
-
Page 2: Product Specifications
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate this tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrically powered tools create sparks SKU 92801 For technical questions, please call 1-800-444-3353. Page 2... -
Page 3: Personal Safety
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. SKU 92801 For technical questions, please call 1-800-444-3353. Page 3... - Page 4 “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SKU 92801 For technical questions, please call 1-800-444-3353. Page 4...
-
Page 5: Specific Safety Rules
Maintain labels and nameplates on the Laser Level. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment. Always turn off the Laser Level and remove its Batteries before changing SKU 92801 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Rear View
Compartment Lid (2), and install four size “C” Batteries. Make sure to install the Batteries matching the polarity marked on the Battery Compartment’s cover. (See Figure A.) REAR VIEW COMPARTMENT KNOB WALL BRACKET COMPARTMENT LID (2) BATTERIES (1) NOT SHOWN. FIGURE A SKU 92801 For technical questions, please call 1-800-444-3353. Page 6... - Page 7 Level Vials (9) located at the top of the Laser. (See Figure C.) RIGHT SIDE VIEW LEFT SIDE VIEW LEVEL VIALS (9) ROTATION SPEED CONTROL (10) LEVELING KNOB FIGURE C SKU 92801 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 The difference in these measurements is the amount of slope in the floor. This technique can also be used to design slope, such as when constructing an out- door surface which will require a runoff slope. SKU 92801 For technical questions, please call 1-800-444-3353. Page 8...
-
Page 9: Inspection, Maintenance, And Cleaning
WARNING! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. NOTE: NO REPLACEMENT PARTS ARE AVAILABLE FOR THIS PRODUCT. SKU 92801 For technical questions, please call 1-800-444-3353. Page 9...