Advertisement
Quick Links
1" MINI-GAUGE DIGITAL CALIPER
Due to continuing improvements, actual product may differ slightly from the product described herein.
Copyright
portion of this manual or any artwork contained herein may be
reproduced in any shape or form without the express written
consent of Harbor Freight Tools. For technical questions and
replacement parts please call 1-800-444-3353.
Material:
Inside/Outside
Measuring Capacities
Battery:
Dimensions:
LCD Display:
Accuracy:
Max Throat:
Anvil Diameter:
Inside Jaw Length:
Dial Readings: Inches/mms
Manual Shutoff
The Digital Caliper also has a computer port for hook up to your
computer (cord not included).
SKU 93297
For technical questions please call 1-800-444-3353.
ASSEMBLY & OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
2005 by Harbor Freight Tools
Technical Specifications
Precision Ground stainless steel
93297
Maximum Range: 0 to .904" or 0 to 22.95mm
SR44SW/LR44 1.5 Volt Silver Oxide (included)
3-7/8" W x 1-15/16" L x 5/8" H
0-1"
+/- .001 or +/- 0.2mm
3/4"
.079"
1/4"
®
®
. All rights reserved. No
Page 1
Advertisement
Related Manuals for CEN-TECH 93297
Summary of Contents for CEN-TECH 93297
- Page 1 3/4” Anvil Diameter: .079” Inside Jaw Length: 1/4” Dial Readings: Inches/mms Manual Shutoff The Digital Caliper also has a computer port for hook up to your computer (cord not included). SKU 93297 For technical questions please call 1-800-444-3353. Page 1...
- Page 2 Push the “On” Button (see Figure 1) to “ON”. Use the thumb control to separate the sides of the Caliper. Slide the object you wish to measure in-between the pins on the Caliper or between the jaws on the Caliper-see Figure 1. SKU 93297 For technical questions please call 1-800-444-3353. Page 2...
- Page 3 Occasional cleaning with a clean rag will extend its life and good appearance. Lock it up and store in a dry location to inhibit rust. Keep out of the reach of children. SKU 93297 For technical questions please call 1-800-444-3353. Page 3...