Advertisement
1.
Wipe the Caliper clean with a lint free cloth.
2.
Always keep the Caliper in the protective case in the OFF position when not in use.
3.
When the battery becomes low, the numeric display will begin to flash. Follow the
directions below to change the battery. Only use a 1.5 Volt (SS44) battery.
Remove the cover. Remove and replace the Battery making sure that you replace the
Battery identically to how the original battery was positioned. Replace the cover.
Note: Other than the battery mentioned above, there are no replacement parts for this unit.
SKU 93028
For technical questions, please call 1-800-444-3353.
Maintenance
FIGURE 2
Battery
Cover
REV 04/05
Page 6
Advertisement
