Rear View - CEN-TECH 92801 Operating Instructions Manual

accessories, performing inspection, maintenance, cleaning procedures, or
storing the tool.
10. Battery precautions: Never burn Batteries, as they can explode in a fire. Con-
tact local solid waste authorities for instructions on correct disposal or recycling of
the Batteries.
11. Industrial applications must follow OSHA requirements.
12. Use the right tool or attachment for the right job. Do not attempt to force a
small tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not in-
tended.
13. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
1. To install the Batteries (1), loosen the compartment knob, remove the Battery
Compartment Lid (2), and install four size "C" Batteries. Make sure to install the
Batteries matching the polarity marked on the Battery Compartment's cover.
(See Figure A.)
WALL BRACKET
(7)
FIGURE A
SKU 92801 For technical questions, please call 1-800-444-3353.
SAVE THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS

REAR VIEW

COMPARTMENT KNOB
COMPARTMENT LID (2)
BATTERIES (1) NOT SHOWN.
Page 6