Husqvarna 531RB Workshop Manual page 52

7.14.1 To remove the gearbox
1. Put a rod through the holes to lock the axle.
2. Remove the nut (A). Remove the blade cover (B),
the holder (C) and the support cup (D).
52 - Repair instructions
D
C
B
A
3. Remove the screws (E), the bracket (G) and the
cutting attachment guard (I). Remove the bracket
(H) if it is not attached to the cutting attachment
guard with glue.
I
4. Loosen, but do not remove, the screw (J). Remove
the screw (K). Remove the gearbox (L) from the
drive shaft tube (M).
M
K K
J
E
G
H
L
935 - 001 -