Displaying An Automatic Table; Before You Begin; Displaying The Table Screen - Texas Instruments TITANIUM TI-89 User Manual

• Set
Graph <
-
Technical Reference module.

Displaying an Automatic Table

Displaying an Automatic Table Displaying an Automatic Table Displaying an Automatic Table
If
Independent = AUTO
automatically when you display the Table screen. If Graph < - > Table
matches the trace values from the Graph screen. If Graph < - > Table
based on the values you entered for

Before You Begin

Before You Begin Before You Begin Before You Begin
Define and select the applicable functions on the Y= Editor (¹ #). This example uses
3
.
y1(x) = x N x/3
Then enter the initial table parameters
(¹ &).

Displaying the Table Screen

Displaying the Table Screen
Displaying the Table Screen Displaying the Table Screen
To display the Table screen, press ¹ ' or O
The cursor initially highlights the cell that contains the starting value of the independent
variable. You can move the cursor to any cell that contains a value.
Tables
and Independent by using the
> Table
on the
TABLE SETUP
dialog box, a table is generated
and @ .
tblStart tbl
.
5
function. Refer to the
setTable
= ON
= OFF
, the table
, the table is
459