Selecting A Flash Application Function - Texas Instruments TITANIUM TI-89 User Manual

Selecting a Flash Application Function

Selecting a Flash Application Function Selecting a Flash Application Function Selecting a Flash Application Function
A Flash application may contain one or more functions. When you select a function, its
name is inserted in the entry line at the cursor location. Therefore, you should position
the cursor as necessary before selecting the function.
1. Press:
½
2. Press ...
Flash Apps
3. Move the 8 indicator to the function, and press ¸.
To move the
8
One function or program at a time
One page at a time
To the first function that
begins with a specified letter
Operating the Calculator
. (This option is dimmed if no Flash applications are installed.)
• The list is alphabetized by function name.
The left column lists functions. The right
column lists the Flash application that
contains the function.
• Information about a function is displayed
in the status line.
• To exit without selecting a function, press
N
.
indicator:
Press or type:
D C
or
2 D 2 C
or
The letter key. (On the TI-89
Titanium, do not press
you do, you need to press
2 ™
again before you can
type a letter.)
first. If
j
j or
195