Cutting, Copying, And Pasting Text - Texas Instruments TITANIUM TI-89 User Manual

Cutting, Copying, and Pasting Text

Cutting, Copying, and Pasting Text Cutting, Copying, and Pasting Text Cutting, Copying, and Pasting Text
Cutting and copying both place highlighted text into the clipboard of the TI-89 Titanium.
Cutting deletes the text from its current location (used to move text) and copying leaves
the text.
1. Highlight the text you want to move or copy.
2. Press ƒ.
3. Select the applicable menu item.
• To move the text, select
— or —
• To copy the text, select
You can press:
Note:
@ ¹ 5, ¹ 6, ¹ 7
to cut, copy, and paste without having to
use the ƒ toolbar menu.
4. Move the text cursor to the location where you want to insert the text.
5. Press ƒ and then select
You can use this general procedure to cut, copy, and paste text:
• Within the same text session.
• From one text session to another. After cutting or copying text in one session, open
the other session and then paste the text.
• From a text session to a different application. For example, you can paste the text
into the Home screen's entry line.
Text Editor
.
4:Cut
.
5:Copy
.
6:Paste
653