Chapter 7. Replace Concurrent Removable Media Backplane - IBM e Server iSeries 825 Manual

Removable media device

Table of Contents

Chapter 7. Replace concurrent removable media backplane

To replace feature 5306 concurrent removable media backplane, follow these steps:

__ 1. Perform prerequisite tasks as described in Chapter 2, "Before you begin," on page 3.

__ 2. "Power down the system unit" on page 31.

__ 3. Remove the front cover.

__ 4. If possible, use a wrist strap to prevent electrostatic discharge from damaging your hardware. If

you do not have a wrist strap, touch a metal surface of the system or expansion unit before

installing or replacing hardware.

If you received the 2209 Disposable Wrist Strap, follow these steps:

__ a. Attach the disposable wrist strap.

__ b. When you unroll the strap, remove the liner from the copper foil at the end.

__ c. Attach the adhesive part of the copper foil to an exposed, unpainted metal surface on the

frame of the unit.

Note: Follow the same precautions you would use without the wrist strap. The 2209 Disposable

Wrist Strap is for static control. It will not increase or decrease your risk of receiving electric

shock when using or working on electrical equipment.

__ 5. Remove the media devices from the unit.

__ 6. Remove the screws A .

View video.

Table of Contents