Table of Contents
Advertisement
Figure 6. Installing the removable media device
__ 7. Install the front cover.
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on metal parts
of the system or the products that attach to the system. It is the customer's responsibility to
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
(RSFTD201)
__ 8. Plug in the system unit and system unit console. Plug in everything you previously unplugged
such as printers and displays.
__ 9. Power on all attached devices, such as printers and displays.
__ 10. Look at the Function/Data display on the control panel.
__ 11. Does 01 B V=S with Normal indicator (OK) illuminated appear in the Function/Data display?
__
Yes: Continue with the next step.
__
No: Do the following:
__ a. Press the Mode Select button until the Manual indicator (a small hand) is
illuminated.
__ b. Press the Increment/Decrement push button until 02 appears in the Function/Data
display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in the Function/Data
display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in the Function/Data
display
__ g. Press the Enter push button on the control panel.
Chapter 6. Install removable media devices in iSeries 825
23
Advertisement
Table of Contents
