Chapter 6. Install Removable Media Devices In Iseries 825 - IBM e Server iSeries 825 Manual

Chapter 6. Install removable media devices in iSeries 825

To install a removable media device, perform these tasks:
Note: The figures in these instructions may not look exactly like the server that you have. However, the
steps to perform the task are the same.
__ 1. Perform prerequisite tasks as described in Chapter 2, "Before you begin," on page 3.
__ 2. Remove the front cover.
__ 3. If possible, use a wrist strap to prevent electrostatic discharge from damaging your hardware. If
you do not have a wrist strap, touch a metal surface of the system or expansion unit before
installing or replacing hardware.
If you received the 2209 Disposable Wrist Strap, follow these steps:
__ a. Attach the disposable wrist strap.
__ b. When you unroll the strap, remove the liner from the copper foil at the end.
__ c. Attach the adhesive part of the copper foil to an exposed, unpainted metal surface on the
frame of the unit.
Note: Follow the same precautions you would use without the wrist strap. The 2209 Disposable
Wrist Strap is for static control. It will not increase or decrease your risk of receiving electric
shock when using or working on electrical equipment.
© Copyright IBM Corp. 2000, 2005
View video.
19