Table of Contents
Advertisement
__ f. Press the Increment/Decrement push button until S appears in the Function/Data
display
__ g. Press the Enter push button on the control panel.
__ h. Press the Mode Select button until the Normal indicator (OK) is illuminated.
__ i. Press the Enter push button on the control panel.
__ j. Press the Increment/Decrement push button until 01 appears in the Function/Data
display.
__ k. Press the Enter push button on the control panel.
01 B S with Normal indicator (OK) illuminated appear in the Function/Data display.
If it does not appear, repeat steps 9a on page 10 through 9j.
__ l. Go to step 10.
__ 10. Power on the workstation or PC that is your console.
__ 11. Press the system-unit power-on button. The power-on light will appear.
Note: There is an approximately 10-second delay before the power on. The system takes
approximately 5 to 20 minutes to power on and complete an IPL.
__ 12. Sign on the system unit. Ensure that you have service tools authority.
__ 13. Do the following to verify your removable media device you just installed:
__ a. You need to sign on with service authority.
__ b. Type strsst on the Main Menu command line.
Press Enter.
__ c. Type your service tools user ID and service tools password on the System Service Tools
(SST) Sign On display.
Press Enter.
__ d. Select Start a service tool on the System Service Tools (SST) display.
Press Enter.
__ e. Select Hardware service manager on the Start a Service Tool display.
Press Enter.
__ f. Press F6 (Print the configuration) from the Hardware Service Manager display.
__ g. Select Packaging hardware resources (systems, frames, cards, ...) from the Hardware Service
Manager display.
Press Enter.
__ h. Type 9 (Hardware contained within package) in the Opt column next to the system or
expansion unit on the Packaging Hardware Resources display.
Press Enter.
__ i. Scroll up or down until the removable media device you installed is shown.
__ j. To return to the Main Menu, press F3 (Exit) three times and then press Enter.
__ k. Place the configuration list where you can refer to it in the future.
__ 14. For information on how to make your removable media device operational, go to the Work with
storage topic in the Information Center.
__ 15. Your feature installation is complete.
Chapter 4. Install removable media devices in iSeries 270, 800, 810, or 820
11
Advertisement
Table of Contents
