Table of Contents
Advertisement
Unit Covers
Locate the diagram of the unit you are working on:
v "270, 800, 810 and 820 System Units"
v "270, 800, or 810 unit in a rack" on page 35
270, 800, 810 and 820 System Units
To allow access to the removable media device location, you need to remove the covers.
__ 1. Place your hand near the bottom of the back cover, if you have one, and lift up and out.
__ 2. 270, 800, and 810 units—Remove the right side cover (view from back) by loosening the
thumbscrews and sliding the cover from front to back until it stops.
820 unit—Remove the left side cover (view from back) by loosening the thumbscrews and sliding
the cover from front to back until it stops.
__ 3. Pull the cover out.
__ 4. Remove the front cover.
© Copyright IBM Corp. 2000, 2005
33
Advertisement
Table of Contents
