Adding A New Computer To Your Network - THOMSON ST585 V6 Setup And User Manual

Chapter 3

Adding a New Computer to your Network

3 Adding a New Computer to your Network
Guided Installation
If you configured your Thomson Gateway using the
computer that you want to add.
At a specific point in the installation, the Setup wizard will inform you that the Thomson Gateway has already
been configured:
Select No and click Next to continue.
Manual Installation
If you want to connect your computer to the Thomson Gateway using:
>
A Wireless connection, continue with
>
The Ethernet cable, continue with
E-DOC-CTC-20080627-0003 v1.0
Guided Installation, use the same procedure on the
"4 Wireless" on page 21.
"3.1 Connecting a Computer Using the Ethernet Cable" on page 20.
19