Back Of The Unit; Description Of Jacks - THOMSON Network Router User Manual

9-12VDC
1
2

Back of the Unit

Description of Jacks and Switches (from left to right)
1. Antenna jack
2. Power jack
3. Ethernet jacks
4. USB jack
5. RESET switch
5. CABLE jack
Chapter 4
Chapter 4: Additional Information
Ethernet
3
Connects to the 80 2.11b/g wireless antenna included with the gateway.
Connects to the AC power supply; requires 9-12 V AC. Important: Use only
the power supply included with the gateway, otherwise you may damage
the unit.
Connect to LAN-side PCs, printers, etc. using Ethernet cables.
Connects to a LAN-side PC using a USB cable.
Enables two types of gateway resets. Pressing and releasing the
button causes a reboot, e.g. the same as removing the power, and user
confi guration is retained. Pressing and holding the button for 15 seconds
resets the gateway to the factory defaults, including deleting all user
confi guration.
Connects to the WAN-side coaxial cable jack from your cable company.
USB
RESET
4 5
Cable
6
61