Table of Contents
Advertisement
SpeedTouch 210i
Note: The filter log will be displayed on the Telnet terminal when you type the "log -f"
Editing the Filter Sets
Call Filter – Check Enable to activate the Call Filter function. Assign a start
filter set for Call Filter.
Data Filter – Check Enable to activate the Data Filter function. Assign a start
filter set for Data Filter.
Log Flag – For troubleshooting purpose, you need to specify the filter log here.
None - The log function is inactive.
Block - All blocked packets will be logged.
Pass - All passed packets will be logged.
No Match - The log function will record all packets that are
unmatched.
command.
MAC Address for Packet Duplication – Logged packets may also be
logged to another location via Ethernet. If you want to duplicate logged packets
from the router to another network device, you must enter the MAC address
(HEX Format) of the other devices. Enter "0" to disable the feature. It will be
helpful under Ethernet switch environment.
48
Advertisement
Table of Contents
