THOMSON SpeedTouch 210i User Manual page 33

Check to enable the user account – Check this item to activate the
individual user account.
Username – Specify a username for the specific dial-in user.
Password – Specify a password for the specific dial-in user.
Idle Timeout – Default setting is 300 seconds. When a dial-in connection has
been idled longer than the time limit, the router will drop the connection.
Check to enable CLID authentication – For extra security, enables the
option to allow the dial-in user to call only from a specific number. CLID
stands for Calling Line Identification.
Peer ISDN Number – If CLID authentication has been enabled, enter the
dial-in user's ISDN number.
Callback Function
The callback function provides a callback service for the dial-in user. The router owner
will be charged the connection fee by the telecom.
Check to enable the Callback function – Enable the callback function.
Specify the callback number – This option is for extra security. Once
enabled, the router will only call back to the specified ISDN number defined in
the next parameter, Callback Number.
Callback Number – If the previous option has been enabled, enter the dial-in
user's ISDN line number here.
Check to enable Callback Budget Control – Enable the callback budget
control.
Callback Budget (Unit: minutes) – By default, the callback function has a
30-minute time restriction. The budget will be decreased automatically per
callback connection. Once the callback budget has been exhausted, the
callback mechanism will be disabled automatically.
29
SpeedTouch 210i