Procedure For All Access Points - Technicolor TG122N Setup And User Manual

3 ASSOCIATE YOUR WIRELESS USB ADAPTOR TO YOUR ACCESS POINT

3.1.2 Procedure for All Access Points

Procedure
Proceed as follows:
1 Double-click the Wireless Configuration Utility icon (
2 The Wireless Configuration Utility appears.
3 Click WPS.
4 The WiFi Protected Setup wizard appears:
Following options are available:
Push the button on my access point.

If you select this option, you will have to push a button on your access point to start the WPS registration.
 Enter the PIN from my access point.
If you select this option, you will have to enter a PIN code provided by your access point. If you are using a Technicolor
access point, you can find this PIN code on a label on your Technicolor access point.
5 Select the option of your choice and click Next.
6 Follow the instructions.
10
) in the notification area.
E-DOC-CTC-20100623-0002 v2.0