3 ASSOCIATE YOUR WIRELESS USB ADAPTOR TO YOUR ACCESS POINT
3.2 Manual Association
What operating system are you using?
If your computer runs:
Windows 7, proceed with
Windows Vista, proceed with
Windows XP, proceed with
If you are using the Access Control List (ACL)
Some access points enable you to allow/deny wireless clients to access your network based on their MAC address. If you
configured this feature on your access point, you must add the MAC address of the Wireless USB Adaptor to the ACL.
You can find this MAC address on the back of your Wireless USB Adaptor.
In case of problems
If you encounter problems during the installation, consult
E-DOC-CTC-20100623-0002 v2.0
"3.2.1 Association on Windows 7" on page
"3.2.2 Association on Windows Vista" on page
"3.2.3 Association on Windows XP" on page
"5 Troubleshooting" on page
12.
13.
14.
23.
11