About Your Wireless Usb Adaptor - Technicolor TG122N Setup And User Manual

1 About your Wireless USB Adaptor

Introduction
The Technicolor TG122n is a wireless network adapter that seamlessly integrates with existing Ethernet networks to support
applications such as mobile users or temporary conferences. Just install enough wireless access points to cover your network
area, plug wireless adaptors into your computers, and start networking.
Using this USB adapter in conjunction with a wireless access point, you can create an instant network that integrates with
existing Ethernet LANs. Moreover, moving or expanding your network is as easy as moving or installing additional access
points – no wires!
The Technicolor TG122n
LED indicators
Indicator
Colour State
Green Flashing
Solid
Off
System Requirements
To install the Wireless USB Adaptor, your computer must:
Have a USB port.

To obtain maximum wireless networking speed, a USB 2.0 compatible port is needed.
Run one of the following operating systems:

 Microsoft Windows 7
 Microsoft Windows Vista
 Microsoft Windows XP SP1 or higher
What do I need to do to before I can use my Wireless USB Adaptor?
To connect your Wireless USB Adaptor to your wireless network you have to:
1 Install the Drivers.
2 Associate your Wireless USB Adaptor to your Access
The following chapters will describe how to do this.
E-DOC-CTC-20100623-0002 v2.0
Description
Wireless USB Adaptor enabled, and scanning for available networks and/or transmitting
or receiving data
Wireless USB Adaptor enabled.
Wireless USB Adaptor disabled
Point.
1 ABOUT YOUR WIRELESS USB ADAPTOR
3