Configuration - Technicolor TG122N Setup And User Manual

4 WIRELESS CONFIGURATION UTILITY

4.2 Configuration

The Configuration page
The configuration tab allows you to view/change the configuration of your Wireless USB Adaptor. Your Wireless USB
Adaptor must use the same settings in order to connect to your network.
Properties
Following properties are available for configuration:
Profile Name:

You can save the current settings to a profile. This allows you to easily switch between configurations. For example, you
can use one profile to connect to your home network and second one to connect to your office network.
SSID:

The network name of the wireless network.
Wireless Mode can have following values:

 Infrastructure: all traffic passes through an access point.
 Ad-hoc: traffic is sent from one computer to another.
Authentication:

Allows you to select the authentication method used by your access point.
Encryption:

Allows you to select the encryption used by your access point. The content of this list may depends on the authentication
that you selected in the Authentication list. As soon as you select an encryption type, the Wireless Configuration Utility
will display a new section where you can enter a passphrase or select a certificate.
18
E-DOC-CTC-20100623-0002 v2.0