Exposure Time - THOMSON RP5430 Operator's Manual

Exposure Time

The exposure time values of 1/200, 1/500 and 1/1000
of a second are used to capture fast moving objects
so that these can be played back sharply in slow
motion. The value selected depends on the speed of
the moving object.
Note: Increasing the exposure speed lowers the
camera sensitivity proportionally.
The exposure selection also includes lighting control
positions which can be used when shooting with
lighting that is operating at a different frequency to the
camera. There are two position 50 Hz and 60 Hz. Each
of these positions can be varied further in a range from
-10 to +10.
To reduce flicker select the frequency closest to the
frequency of the lights and then vary the lighting
control in the system Install menu to obtain the best
result.
Shooting Operator's Manual LDK 200 Triax 5-7