Hach ORBISPHERE K1200 Basic User Manual page 16

Option
Grid button
Auto scale update button Automatically set the graph upper and lower bounds to best fit the actual values
Clean button
Statistic view
This feature offers statistical data to match with Total Quality Management tools to better analyze
how a process behaves. The statistics are calculated from the data in the measurement file and
values updated each time a new measurement is added.
Diagnostic view
The diagnostic view contains important information but is only really useful for troubleshooting
purposes.
Measurement menu
Instrument configuration
1. Select Config. instrument from the Measurement menu:
Option
Measurement mode Continuous mode for on line process. Locked onContinuous mode.
Pressure
Temperature
Measurement configuration
1. Select Configure channel from the Measurement menu:
Option
Sensor
Medium
Gas unit type
Gas unit
Liquid
Display resolution A maximum of 5 digits can be displayed. Decimals can be limited to 0, 1, 2 or 3 for
16 English
Description
Set up the graph to display the x or y axes, grid, or alarm thresholds.
displayed.
Clear the graph being displayed and restart.
Description
Sample mode for lab sample analysis of small individual samples, such as cans or
bottles.
Select the barometric pressure units.
Select the temperature units.
Description
Displays the sensor model.
For the K1200 sensor this option is locked on Liquid.
Select Partial, Fraction, or Dissolved.
When a composite unit is selected the unit will change depending on the range of the
value to display. The list of available units depends on the gas unit type selected.
For the K1200 sensor this option is locked on Water.
easier reading. The resolution affects only the data displayed, not the resolution of data
measured and stored.