Message Alert Tone - AT&T DL72119 Quick Start Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. The tone stops when all
new messages have been reviewed. By default, the message alert tone is Off.
To turn on or off the message alert tone:
MENU/
1. Press
2. Press or
CID
3. Press or
CID
4. Press or
CID
5. Press or
CID
in idle mode.
SELECT
to highlight Answering sys, then press
DIR
to highlight Ans sys setup, then press
DIR
to highlight Msg alert tone, then press
DIR
to choose On or Off, then press
DIR MENU
76
/SELECT
MENU
/SELECT
.
MENU
/SELECT
MENU
/SELECT.
.
.