Voice Guide To Set Smart Call; Blocker - AT&T DL72119 Quick Start Manual

Smart call blocker
Call block settings
Voice guide to set Smart call blocker
This feature is an easy and alternative way for you to do the basic setup of
Smart call blocker. You can follow the voice guide to set your telephone system
to allow or to screen all incoming home calls, or to screen home calls that do
not display a phone number.
1. Press MENU/
2. Press q or p
CID
3. Press q or p
CID
4. You hear a voice prompt "Hello! This voice guide will assist you with the basic
setup of Smart call blocker..."
5. Set up your Smart call blocker feature by inputting the designated numbers,
as instructed in the voice guide.
Press 1 if you want to screen home calls with telephone numbers that are
f
not saved in your directory, allow list or star name list; or
Press 2 if you do not want to screen calls, and want to allow all incoming
f
calls to get through.
Notes:
The screening feature of Smart call blocker is applicable to home calls only. All incoming cell calls will get through and ring. If
f
you want to block a cell call, add the number to the block list. See Block list on page 50.
You can press
OFF
f
After a power outage, the handset prompts you to set the date and time. After the date and time setting is done or
f
skipped, the handset will prompt if you want to set up Smart call blocker via voice guide. Press
start the setup.
to enter the main menu when the handset is not in use.
SELECT
to scroll to Smart call blk, then press
DIR
to scroll to Voice guide, then press
DIR
/CANCEL to quit the voice guide at any time.
65
/SELECT.
MENU
/SELECT.
MENU
/SELECT to
MENU