Selecting A Track; Skipping To The Next Or Previous Track; Selecting By Track Number; Search Forward And Backward - Tascam CD-200 Owner's Manual

4 − Playing back CDs

Selecting a track

There are two ways to select a track. You can move (skip)
to the previous or next track, or you can select a track
directly by its track number.

Skipping to the next or previous track

Press a SEARCH Ô/ (Â/¯) key on the
main unit or a search (Ô/Â, ¯/) key on
the remote control.
After selecting the track, press the
on the main unit or the remote control to start track
playback.
Search Ô/ keys

Selecting by track number

Use the numeric keys (0–9) on the remote control to
directly set a track for playback by number.
Track numbers can have up to two digits for audio CDs and
up to three digits for data CDs.
1 Use the remote control numeric keys (0–9) to input
the track number. Input the track number starting
with the first digit as in the example below.
16
TASCAM CD-200
PLAY/READY key
SEARCH Ô/ keys
To select track 1:
ª
Press the "1" key one time.
To select track 12:
ª
Press the "1" key followed by the "2" key.
2 Press the
PLAY/READY
remote control.
The selected track begins to play.
If you press the STOP key on the main unit or the
remote control, the display stops showing the track
number input and the display returns to its previous
state.
The numeric keys cannot be used to select a track when
in program or shuffle mode.

Search forward and backward

You can search forward and backward in a track while
listening to it.
1 Play or pause the desired track.
2 Press and hold a SEARCH
on the main unit or a search (Ô/Â, ¯/)
key on the remote control to start searching forward
or backward.
3 Release the key that you are holding to stop search-
ing and return the unit to the state it was in before
searching (playback or pause).
Numeric
keys
(0 - 9)
key on the main unit or the
Ô/ (Â/¯) key