Troubleshooting - Tascam CD-200 Owner's Manual

IMPORTANT SAFETY PRECAUTIONS
5 − Message Lists
If you have problems with your system, look through this
chart and see if you can solve the problem yourself before
calling your dealer or TEAC service center.
No power
ª
e Check the connection to the AC power supply.
Remote control doesn't work.
ª
e Check to see if the batteries are properly installed in the
remote control.
e If the batteries are dead, change the batteries.
No sound
ª
e Check the connection to the monitor system again.
e Check the volume and settings of the amplifier.
There is unwanted noise.
ª
e Are the connecting cables all properly connected and
functioning?
A CD cannot be played back.
ª
e If you are using a data CD with MP3 files, confirm that
the file bit-rates are compatible with this unit.
e Is the disc scratched or dirty?
The files on a data CD cannot all be played
ª
back.
e Is the unit in folder playback mode?
24
TASCAM CD-200
6 − Troubleshooting