Selecting A Track; Skipping To The Next Or Previous Track; Selecting By Track Number; Selecting A Folder (Data Cds Only) - Tascam CD-A550 Owner's Manual

5 – Playing Back CDs

Selecting a track

There are two ways to select a track. You can move (skip) to
the previous or next track, or you can select a track directly
by its track number. In addition, you can skip to the next or
previous folder of a data CD.

Skipping to the next or previous track

Press the / or /
Ô Â ¯ 
the / key on the remote control. In addition,
SKIP Â
¯
if you press and hold a SKIP Â
control, the unit skips through multiple tracks successively.
If you skip to a track during playback, the selected
•
track begins playing immediately.
If you skip to a track while playback is paused or
•
stopped, playback pauses at the beginning of the
selected track.
SKIP ( Ô/Â, ¯/ ) key
SKIP Â/¯ key

Selecting by track number

You can use the numeric keys (0–9) on the remote control
to directly set a track for playback by number.
Track numbers can have up to two digits for audio CDs and
up to three digits for data CDs.
1 Use the remote control numeric keys (0–9) to input
the track number. Input the track number starting
with the first digit as in the example below.
24
TASCAM CD-A550/CD-A750
key on the main unit or
/ key on the remote
¯
• To select track 1:
Press the " " key one time.
1
• To select track 12:
Press the " " key followed by the "
1
2 Press the CD key on the main unit or the
PLAY
remote control. The selected track begins to play.
If you press the READY key instead of the CD PLAY
•
key, playback is paused at the beginning of the
selected track.
If you press the ENTER key instead of the CD PLAY
•
key, the following occurs depending on whether the
unit was playing before the track number was input
in step 1 above.
Playing: the selected track starts to play.
Paused or stopped: the unit pauses at the begin-
ning of the selected track.
The numeric keys cannot be used to select a track
•
when in program or random mode.

Selecting a folder (data CDs only)

When using a data CD, you can skip to the previous or next
folder by pressing the
FOLDER SEARCH –
pressing and holding the
SHIFT
pressing the FOLDER Ó / keys on the remote control.
Á
This will skip to the beginning of the first track in the
previous or next folder. If you hold down one of these keys,
you can skip through folders continually.
Numeric keys (0-9)
" key.
2
/ keys while
+
key on the main unit or by