Playback Modes; Basic Playback Operation; Using Headphones; Track Selection - Tascam CD-01 U Owner's Manual

6 - Playback

Playback modes

There are four different playback modes. The mode
selected is indicated on the display.
Normal (continuous) playback mode: no indication lamp
Single playback mode: S is lit
Program playback mode: PGM is lit
Random playback mode: RANDOM is lit
The playback mode can be selected using the PLAY
MODE key on the remote control. Pressing the key

Basic playback operation

1 Push the POWER switch to turn on the unit.
The display will indicate NO DISC.
2 Insert a disc into the slot, label side upwards.
After a disc is inserted, the total playing time and
number of tracks will be displayed.
Do not force the disc into the slot, the CD-01U/CD-
01U Pro will pull the disc when partially inserted.
3 Press the ¥?π key on the front panel or ¥ key on
the remote control unit.
The play indication will light up, and playback begins
from track 1. The number of the current track in play
is indicated on the display.
To stop playback, press the ª key on the front panel
or remote control unit.
To pause playback, press the ¥?π key on the front
panel again or π key on the remote control unit.
The indication will blink, and the unit will enter play-

Using headphones

Plug the headphone cord into the PHONES jack.
Adjust the volume with the volume control.
When using headphones, take care not to turn the vol-

Track selection

Select desired tracks for playback with the skip keys on
the front panel or on the remote control.
To restart playback from the beginning of the track in
play, press the µ once.
To skip to the previous track, press µ twice.
To skip to the next track, press ≤ once.
When Auto Cue is off and the CD-01U/CD-01U Pro is
in stop or play mode, playback begins after selecting
the track.
16
TASCAM CD-01U/CD-01UPro
changes the playback mode in the following order:
Cont ∑ Single ∑ Program ∑ Random
You can also select the playback mode pressing the
CALL/PLAY MODE key on the front panel when in
SHIFT mode.
While the mode can be changed from any playback
mode, the explanation in this manual will assume the
user is starting from the normal Continuous mode.
back standby mode.
To resume playback, press the ¥?π key or the front
panel or ¥key on the remote control.
To remove the disc
Press the EJECT key on either the front panel or
remote control unit.
You can insert back a disc into the slot by pressing the
EJECT key or pull the disc and slot it in again.
When Eject Block is activated, EJECT key cannot be
used when disc is being played back.
To play a desired track
Press the SKIP key to select the desired track or
numerical keys.
ume too high. Listening at high volumes for extended
periods of time may result in permanent hearing dam-
age.
When Auto Cue is off and the CD-01U/CD-01U Pro is
in pause mode, the beginning of selected track is locat-
ed ,and the unit enters playback standby mode.
When Auto Cue is on and the CD-01U/CD-01U Pro is
in play mode, playback begins after selecting the track.
When Auto Cue is on and the CD-01U/CD-01U Pro is
in pause or stop mode, when a track is selected, the
point where sound begins (not where the track begins)
on that track is located, and the unit enters playback
standby mode.