Advanced Operations; Auto Cue; Auto Ready; Resume - Tascam CD-01 U Owner's Manual

7 - Advanced operations

Auto Cue

When the Auto Cue function is turned on and a track is
selected, the point where sound begins (not where the
track begins) on that track is located to and the unit
enters pause mode.
When the ¥ key is pressed, playback begins at exactly
that point.
Auto Cue is not supported for MP3 playback.
During stop mode, to cue to the start of sound on track
one, just press the π key.

Auto Ready

When the Auto Ready function is on, after each track is
played, playback standby mode is entered at the begin-
ning of the next track.
The behavior of Auto Ready function is follows.
Continuous play mode:
Pause the beginning of the next track when playback
of the current track is finished.
Single play mode:
Pause the beginning of the current track when play-
back of the current track is finished.
Program play mode:
Pause the beginning of the next programmed track
when playback of the current track is finished.

Resume

When the resume function is on, the playback stop
position is memorized and playback starts from that
position when playback is resumed.
In the case of MP3 discs, the playback starts from the
beginning of the last playing track when playback is
resumed.
Turning the Resume function on and off
Set the resume function on and off on the menu (menu

Call

Pressing the CALL key on either the front panel or
remote control locates the unit to last play start point,
and the unit enters playback standby mode.
18
TASCAM CD-01U/CD-01UPro
Turning the Auto Cue function on and off
Press the µ key on the front panel when SHIFT indi-
cator is lit or A.CUE/DEL key on the remote control to
select the auto cue level.
Auto cue level: OFF (default), -24, -30, -36, -42,
-48, -54, -60, -66, -72 (dB)
When the Auto Cue function is activated, A.CUE indica-
tor is lit on the display.
Even when the power is turned off, the Auto Cue setting
is maintained.
When the Auto Cue function is also on, playback stand-
by mode is entered at the beginning of the sound on
the selected track, and not the beginning of that track.
Turning the Auto Ready function on and off
Press the ≤ key on the front panel when SHIFT indi-
cator is lit or A.RDY/INS key on the remote control to
turn the function on and off.
When the Auto Ready function is on, A.RDY indicator is
lit on the display.
Even when the power is turned off, the Auto Ready set-
ting is maintained.
number 09 RESUME).
When the Resume function is on, RESUME indicator is
lit on the display.
Even when the power is turned off, this setting is main-
tained.
This function is not supported for MP3 playback.