Operating Hints - Targus Wireless RF Mouse User Manual

Targus Wireless RF Mouse
The receiver's status light flashes while it scans the
identification codes for the mouse. Once a code is
selected, the status light stops flashing.
3 Press and release the screen scroller (middle)
button.
You are now ready to use the RF mouse.
NOTE: You must reestablish the communications link every
time you change the batteries.

Operating Hints

For optimal performance and RF reception:
• Place the receiver at least 8 inches (20 cm) away
from all electrical devices, such as your monitor,
speakers or external storage devices.
• Avoid using the RF mouse on a metal surface.
Metals, such as iron, aluminum or copper, shield
the radio frequency transmission and may slow
down the mouse's response time or cause the
mouse to fail temporarily.
• The RF mouse will enter a suspend mode at the
same time your computer does. To wake the
mouse, press and release the screen scroller
(middle) button.
• If your computer has a metal case that contains
aluminum or magnesium, use the RF mouse to the
side. The display panel may interfere with the radio
frequency signal if you use the mouse directly in
front of the computer.
7