Targus Wireless RF Mouse User Manual page 6

Targus Wireless RF Mouse
2 Insert the supplied batteries, making sure that
the positive (+) and negative (-) ends of each
battery match the polarity indicators inside the
battery housing.
3 Slide the battery cover back into position until it
"clicks" firmly into place.
If you have a model PAUM005 RF mouse, the
optical sensor, located on the bottom of the mouse,
glows red.
WARNINGS: When replacing the batteries, you may use
alkaline or other heavy-duty NiMH batteries. Never use an
alkaline with a NiMH battery in a device.
Avoid mixing new and used batteries in a device.
Establishing a Communications Link (All
RF Mouse Models)
The RF mouse has 256 identification codes that
allow the mouse and its receiver to operate without
interference from other radio frequency devices.
To set the identification code and establish a radio
link between the mouse and the receiver:
1 Press and release the link button, located on the
bottom of the RF mouse.
2 Press and release the link button on the
receiver.
6