Troubleshooting - Targus Wireless RF Mouse User Manual

Targus Wireless RF Mouse
Batteries
PAUM005 2 AA Alkaline
PAUM006 2 AAA Alkaline
Operating Current
Mouse:50~60mA (maximum)
Receiver:30mA typically (100mA maximum)
Mouse Standby Current
12mA or lower
Mouse Sleep Mode Current
Below 10uA
Modulation Type
FSK
Transmission Rate
4K bps
Error Detection
8-bit CRC

Troubleshooting

What do I do if the RF mouse does not work?
• Make sure that the polarity of the batteries is
correct. The positive (+) and negative (-) ends of
each battery must match the positive (+) and
negative (-) connections in the battery housing.
• Check that the receiver's USB connector is firmly
attached to the USB port on your computer.
11