Operating Hints - Targus PAWM001E User Manual

Power Management
To power the mouse on and off, slide the on/off switch at the
bottom of the mouse to the desired position.To save battery
power, turn off the mouse while traveling or when you're not
using it.
CAUTION: Removing the batteries will require you to
synchronize it with the receiver again the next time you turn it
back on. See "Synchronizing" on page10.

Operating Hints

For optimal performance and RF reception:
• Avoid using the mouse on a metal surface. Metals, such as
iron, aluminum or copper, shield the radio frequency
transmission and may slow down the mouse's response
time or cause the mouse to fail temporarily.
• The Mouse/Presenter will enter a suspend mode at the
same time your computer does. Click a button on the
mouse to activate it.
• If your computer has a metal case that contains aluminum
or magnesium, use the Mouse/Presenter to the side. The
display panel may interfere with the radio frequency signal if
you use the mouse directly in front of the computer.
• Never use the Mouse/Presenter on a glass or mirrored
surface as these surfaces will cause the mouse to fail
temporarily.
• To maximize battery life, use the Mouse/Presenter on a
white, or light colored surface. Dark surfaces cause the
mouse's LED light to glow brighter, which causes the
battery to discharge more rapidly.
Targus Wireless Notebook Mouse with Presenter
13