TANDBERG 770 MXP User Manual page 201

 2 composite video outputs, RCA connectors.
 1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) output
supporting resolutions SVGA (800x600) and XGA (1024x768, analog or digital.
The first Mini-DIN connector and the first RCA connector provide main video (incoming/outgoing
video and menus).
The other connector provide selfview/still image/Duo Video. The outputs are always active.
The format of the output will be either PAL or NTSC depending on your country's standard video
format
The VGA/DVI output provides either main monitor video or second monitor video depending on
menu configuration..
Levels:
 Composite: 1 Vpp, 75 ohm
 S-Video (Y/C):
 Y: 1 Vpp, 75 ohm
 C (PAL): 0.3 Vpp, 75 ohm
 C (NTSC): 0.28 Vpp, 75 ohm
VGA formats supported on 'DVI-I out':
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz
DVI and specifications:
DVI stands for Digital Video Interface, and is a form of video interface technology made to
maximize the quality of flat panel LCD monitors and high-end video graphics cards.
The TANDBERG codec contains a DVI-I plug that can transmit either digital DVI signals or
standard analog VGA signals, depending on what type of monitor is connected.
DVI Specifications
TANDBERG DVI-I follows the VESA Monitor Timing Standard v1.08, also knows as Display
Monitor Timing (DMT).
Analog Horizontal
Frequency
800x600 @ 46.875kHz
75Hz
1024x768 48.363kHz
@ 60Hz
Digital
800x600 @ 46.875kHz
75Hz
1024x768 48.363kHz
@ 60Hz
DVI-I Video resolution supported in F1 and above
Vertical Pixel
frequency Clock
75.00Hz 49.50MHz
60.004Hz 65.00MHz
75.00Hz 49.50MHz
60.004Hz 65.00MHz
Peripheral Equipment
201