Table of Contents
Advertisement
Installation
ISDN configuration
For each installation of the system it is necessary to configure the unit. All configuration parameters are available
via the menu system. If you are using an external IMUX or special networks, the external equipment may also
need to be configured.
• Press M
on the remote control. Select the menu 'Terminal Settings', then 'Network'.
ENU
Set 'Current Network' to the network you want to use.
Specify the settings for the selected network in the corresponding menu.
For details, follow the instructions in chapter 'Terminal Settings', 'Network Configuration' in this manual.
For further information refer to the examples in:
Appendix 1: Connecting the system to ISDN using NT1 network adapters
Appendix 2: Connecting the system to the Switched 56 network
TANDBERG Videoconferencing System
20
Advertisement
Table of Contents
