Table of Contents
Advertisement
5a. ISDN cables - using BRI interface
Connect the ISDN cables to the ISDN sockets (S/T-interface) provided by the service provider. Your main number
will be the number associated with the socket to which ISDN cable number 1 is connected.
T
HE SYSTEM DOES NOT HAVE A BUILT
NOTE
NT1
AN
BETWEEN YOUR SYSTEM AND YOUR
5b. ISDN cable - using the PRI interface
If you are using the PRI interface, the E1/T1 cable should be connected to a CSU (Channel Service Unit). You will
need a CSU between your system and the PRI line from your network provider, see Appendix 3.
5c. Other networks - using the External Network interface
If you are using other networks, please refer to 'External Network Settings' and 'Appendix 2'.
6. LAN cable
• To use the system on LAN, connect a LAN cable from the 'Ethernet' connector on the system to your LAN.
TANDBERG Videoconferencing System
-
. I
IN NETWORK TERMINATOR
F YOUR WALL SOCKET PROVIDES YOU WITH AN
ISDN
,
A
LINE
SEE
PPENDIX
17
1.
Installation
ISDN U-
,
INTERFACE
YOU WILL NEED
Advertisement
Table of Contents
