Video Cassette Recorder (Vcr) - TANDBERG Video Conferencing System 7000 User Manual

Video Cassette Recorder (VCR)

VCR - Playback
Audio
Codec: Audio Input 6 (VCR)
VCR: Audio Output
vcr
Press VCR to activate the VCR input.
Make sure that 'Audio In 6 (VCR)' is On (see 'Audio Settings'). If audio from VCR is too low, this level can be
adjusted in 'Audio Settings', 'Inputs', 'Level Settings'. The audio from the VCR will be audible in the local speaker
system.
The audio from the VCR and your microphone(s) will be mixed and sent to the far end. When a person talks on
either local or far end, the VCR audio level will be reduced to make it easier to comment on a video recording
when 'Audio Settings', 'Mix Mode: Auto'.
VCR - Recording
When recording, the VCR will record the video as it appears on the main monitor, the local audio and the audio
from the far end.
Audio
Codec: Audio Output 3
VCR: Audio Input
TANDBERG Videoconferencing System
Video
Codec: Video Input 4 (VCR)
VCR: Video Output
Video
Codec: Video Output 3
VCR: Video Input
TIP T
O SIMPLIFY CONNECTING A
CONNECTORS ARE MARKED
For playback, connect a cable between Video Out on the
VCR and 'VideoIn 4 (VCR)' on the system. Connect a
cable between Audio Out on the VCR and the VCR audio
input on the system.
When recording a videoconference, connect a cable
between 'VideoOut 3' on the system and Video In on the
VCR. Connect a cable between 'AudioOut 3' on the system
and Audio In on the VCR.
109
Peripherals
VCR,
THE NECESSARY
'VCR'