Sip Settings - TANDBERG 1000 MXP User Manual

5.8.2.3 SIP Settings

Mode
Setting the SIP mode to on will enable the system for incoming and outgoing SIP
On
calls.
Setting the SIP mode to off will disable incoming and outgoing SIP calls from the
Off
system.
Display Name
The Display name part of the SIP Address (URI) is usually a full name or system name.
Examples:
"Alice Wonderland"
"System 01"
SIP Address
The SIP Address is the SIP URI used to address the system.
SIP Address (URI): <text field>
Examples:
"alice@example.com"
"1234"
"1234@example.com"
Server Discovery
When Auto is selected, the SIP Server address is obtained using Dynamic Host
Auto
Configuration Protocol (DHCP).
When Manual is selected, the manually configured SIP Server address will be
Manual
used.
Administrator Settings
175