TANDBERG 1000 MXP User Manual page 125

TANDBERG 1000 MXP
VGA Out Quality for Wide XGA:
If VGA Monitor Format is set to Wide, PC Picture Format is set to Normal, VGA Out
Quality is set to Auto, the layout on the monitor is either full screen or POP, and the
input source to the largest window is PC with resolution 1024x768, the system will use
WideXGA (1280x768) instead of XGA, when the monitor supports this.
PC Picture Format* (wide screen monitors only)
PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide. Use
this setting to determine if you want your PC presentations to be shown stretched in full screen,
or with correct aspect ratio using part of the widescreen display. With the VGA Out Quality set to
Auto the presentation will be of the best possible quality supported by the monitor.
VGA output will have 4:3 aspect ratio on wide screen monitor.
Normal
VGA output will utilize the wide screen monitor at full.
Wide
PC presentation shown in Normal (correct ratio) mode.
PC Presentation shown in Wide (stretched) mode.
* Not available in TANDBERG 1000 MXP
114