TANDBERG 1000 MXP User Manual page 122

Pressing the Layout button on the remote will result in an extra picture in
Picture in
smaller view (Picture in Picture). Press the Layout button to move it around
Picture (PIP)
in the corners of the screen and finally hide it. Pressing and holding Layout
for 1 second will hide the small picture directly from any position.
Press the Layout button to see the images side-by-side, e.g. 1+1 layout,
Picture
where the far end and near end are displayed as images of equal size, see
outside
figure below.
Picture
(POP)
Press the Layout button once more to change to 1+2 layout. The far end
image will be displayed as the main video, with the near end, usually the
user of the system, as a smaller image in the upper right corner. If Duo
Stream is used, the Dual Stream image is displayed as the main image and
the far end and near end as smaller images to the right, see figure below for
an example.
Press the Layout button again to get the 1+3 layout.
The next time the Layout button is pressed, the normal full screen view of
the far end is displayed. Pressing and holding Layout for 1 second will
always bring you back to full screen.
Example of Picture in Picture.
Example of 1+1 Side-by-Side view (wide screen).
Administrator Settings
111