Administrator Settings > Template Editor > Windows Media Writer
Specifying ServerPush Output Information
About ServerPush Output Information
The ServerPush method, or pushing
the live stream to the Windows Media
streaming server is the default stream-
ing option on the Content Server.
Accessing these Settings
In the
Windows Media Writer Informa-
tion
Page, click on
ServerPush
to pro-
duce the
ServerPush Information
.
Table of
What's New in
Trademark/
Contents
this Version?
Licenses
D 13898.04
DECEMBER 2006
Safety/
Introduction
Installation
Environmental
The ServerPush Output Information Settings
Quick Setup
Operation
0
TANDBERG
Server
name.
The default server name if you are
using the TANDBERG Content Server Windows Media
streaming server is (local).
For streaming off an external streaming server,
enter the server name or IP address of your external
Windows Media streaming server
Port
. The default port if you are using the
TANDBERG Content Server Windows Media
streaming server is 8080. For streaming off an
external streaming server, enter the port to be used
with your external Windows Media streaming server.
Username & Password
. For streaming off an
external streaming server, enter the username &
password to be used for authentication with your
external Windows Media streaming server.
Password confirm
. Type the password again to confirm.
Publishing point copy
. If you have set up a
publishing point on an external Windows Media
streaming server, you can copy the parameters for
your new publishing point
by specifying the Publishing point copy. If your
publishing point on the Windows Media streaming
server is called "my_publishing_point", enter my_
publishing_point in the Publishing point copy field.
You also need to fill in the name of your multicast
template in this field for multicast content delivery.
You may change the title by following instruc-
tions described for
File
Administrator
Conference
View
Settings
Setup
Conferences
CONTENT SERVER
USER GUIDE
Output.
Appendices