Creating And Handling Extra Clips From A Recording; Creating An Extra Clip; Reshuffling Clips; Deleting Clips - TANDBERG CONTENT SERVER D13898.04 User Manual

Viewing Conferences > Editing Contents

Creating and Handling Extra Clips From a Recording

Do this when a conference is to be
split into more than one continuous
piece from the original conference.
There may be two or more sections
of a conference that you want users
to view out of one conference so
creating extra clips and editing each
one is the way to achieve this result.
Click the Save button every few
minutes so that any changes
that are made are kept. If you
have made a change that you do not
want to keep, click the Revert button and
the changes that were made after the
last save will be discarded.
To change the order
of clips, drag the clip
to a new position
or change the index
number.
The order and index
number will change
and this will reflect in
the playback of the
conference.
Index No.
Table of What's New in Trademark/
Contents this Version? Licenses
D 13898.04
DECEMBER 2006

Drag the recording to the clips window.

Reshuffling Clips

Safety/
Introduction
Environmental

Creating an Extra Clip


Causing it to look like this.
Installation Quick Setup Operation
1
TANDBERG
To make another clip from a recording,
select the recording (in the orange part)
in the left-hand window and drag it to
the clips window.
Now change the in and out points of
each clip and when the conference
plays, clip 1 will be followed by clip 2 etc.
This feature is limited to ten
clips per recording.
In and Out points of clips are
described in
Clips.

Deleting Clips

To delete all clips, select the
checkbox at the top of the
clips and click the
Selected
of the clip list.
To delete individual clips,
select the checkbox for the
clip to delete then click the
Delete Selected
bottom of the clip list.
Administrator Conference View
Settings Setup Conferences
CONTENT SERVER
USER GUIDE
Recordings and
Delete
button at the bottom
button at the
Appendices