Table of Contents
Advertisement
Administrator Settings > Template Editor > Real Writer
Specifying ServerPush Information
About ServerPush Information
By default, Real Media templates do
not have ServerPush Output specified.
The ServerPush method, or pushing
the live stream to a streaming server
can be configured by using an external
streaming server, for example a Helix
Streaming Server.
Accessing these Settings
In the
Real Writer Information
Page,
click on
ServerPush
to produce the
ServerPush Output Information
.
Table of
What's New in
Trademark/
Contents
this Version?
Licenses
D 13898.04
DECEMBER 2006
Live and On demand Streaming of Real Media Content from an External Streaming Server
Transcoding and Archiving Real Media format content can be streamed live or on demand off external streaming servers (Helix or G2) .
ServerPush Output Information should be configured in the following way:
Helix
For streaming off a
server, the live streaming path should be rtsp://<servername>/encoder and the on demand path should be
rtsp://<servername>/<archivefoldername>.
For on demand streaming, check
Archive Enabled
For streaming off a
G
server, the live streaming path should be
rtsp://<servername>/broadcast foldername and the on demand path should be rtsp://<servername>/<archivefoldername>.
Archive Enabled
For on demand streaming, check
Safety/
Introduction
Environmental
The File Output Information Settings
on the external server and set the On demand Output in the writer to ServerPush output.
on the external server.
Installation
Quick Setup
Operation
TANDBERG
Server
type.
Select either Server 90 or
Server G2
Server name
. IP address of external
streaming server
Port
. Specify a port that is not already
being used.
Username, Password & Password
confirm
. For streaming off an external
streaming server, enter the username &
password to be used for authentication
with your external streaming server.
Administrator
Conference
View
Settings
Setup
Conferences
CONTENT SERVER
USER GUIDE
Appendices
Advertisement
Table of Contents
