Ricoh P C300W Setup Manual page 11

Connecting the Machine via USB or Ethernet
● For details about IPv4 or IPv6 settings manually, see
User's Guide.
● When connecting the machine via USB, USB interface
cable is necessary to set up.
● When connecting the machine via the Ethernet, the
Ethernet interface cable is necessary to set up.
1. Press the [ ] or [ ] key to select [Wired (Ethernet)], and
then the [OK] key.
Network Wizard 1 2
Wired (Ethernet)
Wireless (Wi-Fi)
2. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
Network Wizard 4 4
IPv4 Configuration
IPv6 Configuration
Quit Setup
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".
ECC037
ECC036
DYG081
ECB240
DUE077 DUE078
9