Ricoh P C300W Setup Manual page 10

4. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
Network Wizard 4 4
IPv4 Configuration
IPv6 Configuration
Quit Setup
5. Press the [Menu] key.
6. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
Settings 6 8
Wi-Fi Setup Wizard
Network Settings
Print List/Report
7. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and
then press the [OK] key.
Network Settings
1 5
Wired (Ethernet)
Wireless (Wi-Fi)
IPv4 Configuration
8. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
Wireless (Wi-Fi) 6 9
Current Connection
Input SSID
WPS
9. Press the [ ] or [ ] key to select [PIN], and then press the
[OK] key.
WPS Type
2 2
PBC
PIN
10. Check the PIN code.
PIN
PIN Code:
XXXXXXXX
Connect Abort
Write down the PIN code in case you might forget it.
11. Enter the machine's PIN code (8 digits) on the router (access
point)'s web page (The web page accessed in Step 2).
8
ECB240
ECB202
ECB206
ECB207
ECB215
DSG096
ECB217
12. Execute WPS (PIN system) from the router (access point)'s
web page.
13. Press the [ ] or [ ] key to select [Connect], and then press
the [OK] key.
PIN
PIN Code:
XXXXXXXX
Connect Abort
"Please wait for 2 minutes" appears and connecting with PIN
method starts.
14. Check the result.
Connection has succeeded:
PIN
Connection to AP
has Succeeded
• Press the [OK] key to return to the screen displayed in Step 6,
and then press the [Menu] key to return to the initial screen.
Connection has failed:
PIN
Connection to AP
has Failed
• Press the [OK] key to return to the screen displayed in Step 6.
Check the configuration for the router (access point), then try
the connection again.
15. Configuring the Wi-Fi settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".
ECB217
EXIT
ECB229
EXIT
ECB230