Lincoln Electric EAGLE 10,000 Service Manual page 68

F-32
TYPICAL DC WELD OUTPUT WAVEFORM (CC MODE)
All manuals and user guides at all-guides.com
TROUBLESHOOTING AND REPAIR
MACHINE LOADED
20 volts
MACHINE LOADED TO 200 AMPS AT 26 VDC
This is the typical DC output voltage
generated from a properly operating
machine. Note that each vertical divi-
sion represents 20 volts and that
each horizontal division represents 5
milliseconds in time. The machine
was loaded with a resistance grid
bank.
Note: Scope probes connected at
machine output terminals.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep .....5 ms/Div.
Coupling.............................DC
Trigger.........................Internal
EAGLE™ 10,000
CH1
0 volts
5 ms
F-32