Lincoln Electric EAGLE 10,000 Service Manual page 24

C-2
OPTIONAL EQUIPMENT
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS - For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements for
brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 Two-Wheel Undercarriage - For moving
by hand. Overall Width 29 in (.74m) Both have pneu-
matic tires. Puncture proof tires included with K889-3.
K1631-1 Puncture Proof Wheel Kit - For converting
K889-2 or K933-1 to puncture proof pneumatic tires.
K893-1 Caster for Undercarriage - Mounts to the
front of the K889-2 or 3 to allow easy movement on
smooth surfaces. Includes 6" diameter hard rubber
wheel and convenient toe-on, toe-off locking brake.
K933-1 Four Wheel Undercarriage - For Hand
Moving. Rear pneumatic tires, front molded wheels.
K934-1 Cylinder Brackets - For use with K933-1. For
transporting one welding gas cylinder.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDERCAR-
RIAGE - For moving by hand at construction sites.
Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas cylin-
ders can be mounted on the rear of the undercarriage
with the installation of K1745-1 Cylinder Holder(s).
Heavy duty puncture resistant pneumatic tires and
front caster.
K1745-1 GAS CYLINDER HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protec-
tion.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 Canvas Cover -To protect the EAGLE 10,000
when not in use. Made from attractive red canvas
material which is flame retardant, mildew resistant, and
water repellent.
All manuals and user guides at all-guides.com
ACCESSORIES
(Field Installed)
EAGLE™ 10,000
K802-R Power Plug Kit- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full KVA
plug rated at 120/240V, 50 amps.
K802-N Power Plug Kit - Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.
K894-1 Spark Arrester Kit - Includes a heavy gauge
steel, approved spark arrester and clamp for easy
mounting to muffler exhaust pipe.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL
approved120V ground fault circuit interrupter duplex type
receptacle with cover and installation instructions.
Replaces the factory installed 120V duplex receptacle.
Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limit-
ed to the 20 Amps. Two kits are required.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a
NEMA 6-50R receptacle, (which accepts 3-prong
plugs.)
T12153-9 Full-KVA Power Plug - One dual voltage plug
rated at 120/240V, 50 amps.
K930-2 TIG Module - Provides high frequency and
shielding gas control.for AC and DC GTAW (TIG) weld-
ing applications. Its compact case is designed foe easy
carrying, complete with a handle. High frequency
bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable,
and K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module,
Provides a "cold" electrode until the triggering device
(Arc Start Switch) is pressed.
K936-4 Control Cable - Connects TIG Module to Eagle
10,000.
K814 Arc Start Switch - Attaches to the TIG torch for
convenient finger control.
K937-45 Control Cable Extension - Allows TIG Module
to be operated at distances up to 200ft. from the power
source. Available in 45ft. (13.7m).
K844-1 Water Valve Kit - For use with water cooled
TIG torch, Installs inside of TIG Module.
K939-1 Docking Kit - For Mounting the K930-2 TIG
Module on top of the Eagle 10,000.
C-2